Skip to content

CREMA 39 mm Distributor and Tamper review

A 39.25-millimeter distributor and tamper in one, for Flair Classic, Signature and Neo Flex.

Where we land on it The only tool on this shelf for a Flair, at 39.25 mm (1.55 in) — and the only one that claims it sits level on the basket rim by itself. If you own a Flair, the shelf has one answer; if you do not, it fits nothing you have.

What the maker puts in writing

  • Working face: 39.25 mm (1.55 in)
  • Fits Flair Classic, Signature and Neo Flex
  • Double sided: distribute, then flip and tamp
  • Adjustable depth, locked by collar
  • 304 stainless base, aluminum sleeves, balanced to sit level

The diameter decides everything on this shelf

Six tools, four diameters: 39.25, 51, 53 and 58 millimeters. Not one of them is adjustable in width, and no amount of machining quality rescues a tool that is three millimeters wrong.

This one is the Flair tool. If you own a Flair, it is the only one here. If you do not, nothing on this page applies.

The one claim nobody else makes

Balanced weight so it sits level on the basket rim on its own.

A tool that balances is a tool that cannot be tamped crooked. Five other listings on this shelf talk about pressure; this is the only one that talks about angle.

Availability

Read on the day this page was built: $44 at the American Amazon shop.

Read from Keepa on the day this page was last revised; stock and price both move without notice.

What it gets right, and wrong

Strengths

  • The only tool on this shelf sized for a Flair, and Flair baskets fit nothing else here
  • The only listing that claims the tool balances on the rim on its own, which is what stops a tilted tamp
  • 304 stainless with aluminum sleeves, and the maker names a person to ask about fit

Compromises

  • Joint-most expensive on this shelf, for the narrowest working face here
  • No weight published, where three tools on this shelf list one
  • Useless on any machine that is not a Flair — there is no adapter and none is suggested

Where this one stands among its neighbors

At $44, it is the 5 cheapest of the 6 models in this category published here.

  • Least costly of the neighbors$20
  • Median$36
  • Most costly of the neighbors$44

Specifications

Working face39.25 mm (1.55 in)
FitsFlair Classic, Flair Signature, Flair Neo Flex
TypeDouble sided: distributor on one face, flat tamper on the other
DepthAdjustable by twisting the collar, then locked
MaterialHeavy 304 stainless steel base with aluminum sleeves
BalanceWeighted to sit level on the basket rim unaided
FinishBlack
Amazon referenceB08NJF7VJD
EAN0743841216802

What people want to know

Will it fit anything other than a Flair?

No. 39.25 mm (1.55 in) is a Flair basket. The other five tools on this shelf are 51, 53, 53.3 and 58 mm (2.28 in), and none of them is close enough to use. Check the basket before buying anything from this shelf — it is the only measurement that matters here.

What does "sits level on its own" buy me?

A tamp that is flat without you holding it square. A tilted puck channels, which is the single most common fault in home espresso. It is the only balance claim on this shelf, and no figure accompanies it.

Why adjust the depth?

So the distributor reaches the same point in the basket every shot, whatever the dose. at least six of the eleven tools on this shelf adjust; it is the one feature they all share, and it is what makes the prep repeatable rather than approximate.

Compared with the neighboring coffee machines

These coffee machines share the category and the price bracket. Only what each one states is shown; an incomplete column would mislead.

Model Price Working faceFitsTypeDepth
CREMA 39 mm Distributor and Tamper $44 39.25 mm (1.55 in)Flair Classic, Flair Signature, Flair Neo FlexDouble sided: distributor on one face, flat tamper on the otherAdjustable by twisting the collar, then locked
CREMA 53 mm Distributor and Tamper $44 53.3 mm (2.10 in)Breville Barista Express, Express Impress, Barista Pro, Barista Touch, Touch Impress, and most other 53.3 mm (2.10 in) machinesDouble sided: distributor on one face, flat tamper on the otherAdjustable by twisting the collar, then locked
MATOW 58 mm Distributor and Tamper $36 58 mm (2.28 in)Breville Dual Boiler, Oracle, Oracle Touch, La Marzocco, Rocket, Rancilio Silvia, ECM, La Pavoni, Alex Duetto, Astoria, Hamilton Beach and all E61 group headsDual head: distributor one side, tamper the otherAdjustable, to match any basket depth
MATOW 53 mm Dual-Head Tamper $36 53 mm (2.09 in), for Breville 54 mm (2.13 in) portafilter basketsBreville Barista Express, Pro, Touch, Touch Impress, Bambino Plus, Infuser, Duo-Temp ProDual head: distributor and palm tamper in oneFully adjustable, with independent locking height on each side

The difference between the models, in coffee machines

  • If price decides: MATOW 58 mm Distributor and Tamper, at $36.
  • Highest Working face in the table: MATOW 58 mm Distributor and Tamper (58 mm (2.28 in)).

Today’s price and availability, for coffee machines

Details checked on October 30, 2026.

This one and its buyer, among coffee machines

A Flair Classic, Signature or Neo Flex, which nothing else on this shelf will fit

Sources

Specifications: the manufacturer sheet for coffee equipment and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.

The way we judge these coffee machines